Glass Company Littleton, CO

Fixed a cracked window pane in a child’s bedroom. Cracks in window glass weaken insulation and can worsen over time. We replaced the pane with new tempered glass for safety and durability. Always repair cracked window glass quickly to maintain home security and efficiency.

This home had multiple fogged windows with broken seals. We replaced the insulated glass units, improving clarity and insulation. If you see condensation between your window panes, the seal has failed, and replacing the glass is the best solution.

Upgraded an older home in Littleton with brand-new energy-efficient windows. These windows not only enhance the home’s curb appeal but also help regulate indoor temperatures, reducing energy bills year-round. A smart investment for comfort and savings!

Completed a skylight replacement for a client experiencing leaks. Removed the old dome unit and installed a triple-pane skylight with insulated glazing. Ensured proper thermal sealing using butyl tape and weather-resistant caulking for maximum energy efficiency.

Working for our client in Littleton this morning, I replaced an aging skylight with a low-emissivity (Low-E) glass model. Removed the old frame and prepared the opening with weatherproofing tape. Secured the new skylight using flashing and polyurethane sealant to prevent leaks, ensuring long-term durability.

Replaced a cracked glass shower door in a master bathroom for our client in Littleton, Co. Used a suction lifter and safety gloves to remove the damaged door. Installed a tempered glass door with polished edges, using stainless steel brackets and silicone sealant for a secure fit.

Littleton window glass replacement for a residential property. Removed single-pane wood-framed window, installed double-pane low-E argon-filled replacement. Measured glass to 1/16-inch tolerance. Applied thermal break spacer system. Conducted air infiltration and water penetration resistance testing.

Today in Littleton, I repaired a small crack in a double-pane window. First, I cleaned the glass thoroughly and applied a glass resin with an injection pump to seal the crack. Using a UV curing light, I hardened the resin to restore the window's integrity. The finished repair was smooth and almost invisible, restoring the window's look and strength.

This afternoon, I handled a commercial glass repair job at a storefront in Centennial. The outer pane of a large display window was cracked, requiring precise handling. Using a glass cutter and suction cups, I removed the cracked section and fitted a new laminated glass panel. A bead of silicone sealant along the edges ensured a secure, weatherproof fit.

Today, I installed a custom mirror in a client’s living room. I measured the wall space and mounted heavy-duty mirror clips. After positioning the mirror with adjustable suction cups, I used a laser level to ensure it was aligned perfectly. The result was a securely mounted mirror, adding elegance and depth to the room.

Today, I replaced a leaking skylight for a homeowner. The existing skylight had significant wear and water damage. I carefully removed the old fixed skylight and installed a new Velux vented skylight with energy-efficient glass. I sealed the surrounding area with flashing tape and roofing cement to ensure a watertight fit. I also tested the venting mechanism to ensure smooth operation. The job required using screwdrivers, utility knives, and caulking guns for the precise sealing of the unit. This new skylight will provide better insulation and improve ventilation for the room below.

I repaired a cracked glass panel in a home today in Littleton. The panel was ¼-inch laminated glass, and I used a glass suction cup tool to carefully remove the damaged piece. I replaced it with a new panel and secured it with glazing tape.

I performed a commercial glass repair at a storefront where one of the large display windows had been chipped. After assessing the damage, I used a commercial-grade glass resin to fill in the chip and restore the surface. The resin was applied and cured using a UV light, ensuring a smooth and seamless finish. I then cleaned the surrounding area and tested the integrity of the glass to confirm it was structurally sound. The repaired window now looks clear and professional again, preserving the aesthetic and safety of the storefront while avoiding the need for a full window replacement.

I repaired a cracked window in a living room using a specialized resin. The crack was small but noticeable, so I filled it with resin and smoothed the surface. After allowing it to cure, I tested the repair to ensure the crack wouldn’t spread. The window is now reinforced, and the repair is nearly invisible.

I replaced a frameless glass shower door for a homeowner. The original door had cracks and faulty hinges. I carefully removed the damaged door and installed a new tempered glass door with polished chrome hardware. I aligned the hinges and adjusted the door to ensure smooth operation. After installation, I tested the door for secure closing and proper function, leaving the shower area looking clean and modern.

Installed a custom frameless shower enclosure in a master bathroom. Measured and cut the tempered glass panels to fit, then mounted them using brushed nickel brackets and hinges. Applied clear silicone sealant along the edges to prevent leaks. Tested the door for proper alignment and smooth operation. The installation added a modern, sleek look to the bathroom while ensuring durability.

Repaired a cracked glass pane in a bedroom window. Removed the damaged glass, cleaned the frame, and cut a new piece of double-strength glass to fit. Secured the new pane with fresh glazing points and applied glazing putty around the edges to ensure a tight seal. The repair was completed efficiently, restoring the window to its original condition.

Replaced the shower glass in a bathroom with a new tempered glass panel from Basco. Removed the old, damaged glass and installed the new panel, ensuring it met safety standards. Used high-quality silicone sealant to secure the edges and prevent water leaks. Adjusted the metal frame and hinges for a perfect fit and smooth operation. Proper installation of shower glass is essential for durability and safety. For professional shower glass replacement services, contact us for reliable and efficient solutions.

Repaired the shower glass in the downstairs bathroom. Replaced the old, cracked glass panel with a new, tempered glass pane, ensuring it meets safety standards. Used high-quality silicone sealant to secure the edges and prevent water leaks. Adjusted the metal frame and hinges for a perfect fit and smooth operation. Proper installation and maintenance of shower glass are essential for durability and safety. For professional glass repair services, contact us today for efficient and reliable solutions.

I repaired a window frame in the great room. I removed the damaged sections of the wooden frame and replaced them with new, precisely cut pieces. I used wood glue and finishing nails to secure the new sections. After sanding the joints smooth, I applied primer and paint to match the existing frame. The window is now structurally sound and aesthetically restored.

I repaired a glass sliding door that was off track and had a hairline crack. First, I realigned the door on its track, ensuring smooth operation by adjusting the rollers. Then, I addressed the hairline crack by applying a specialized UV-curing resin to fill and seal the crack, followed by curing with a UV light. The door now operates smoothly, and the crack is no longer visible.

I repaired a cracked single-pane bathroom window. The process involved removing the damaged glass and old glazing compound. I then measured and cut a new piece of glass to fit the existing frame. After securing the new glass with fresh glazing points, I applied a new layer of glazing compound to seal the edges. The window was then cleaned and inspected to ensure a secure and clean repair.

Today, I replaced a cracked shower glass panel in a bathroom using CRL Laurence hardware and SikaBond silicone adhesive. The new tempered glass ensures durability and safety for continued use.

Completed a glass repair for a commercial customer. Repaired a cracked window pane using specialized adhesive and sealant. Ensured a seamless finish to maintain the aesthetics of the building. Inspected surrounding glass panels for any signs of damage or weakness. Advised the customer on preventive measures to minimize future glass issues.

Installed a bay window, enhancing the home's aesthetic and functionality. Positioned the window frame securely, ensuring proper alignment. Installed insulated glass panes for energy efficiency. Tested the window's operation, ensuring smooth opening and closing. Advised the homeowner on maintenance to preserve the window's integrity and efficiency.